+ SAR 77.12 Vat, custom, shipping fees all inclusive
Out of stock
If you want an extremely small, feather-weight wireless microphone system that delivers broadcast-quality sound to use with cameras and mobile devices, with the ability to handle two wireless transmitters so you can put mics on two separate people, nothing is capable of doing this except for the Saramonic Blink 500 B2. It comes with two clip-on wireless transmitters that have built-in mics, two professional lavalier microphones, and a dual-channel receiver that mounts to the shoe of your camera. You can put mics on two separate people, and it will work perfectly with the included ultracompact dual receiver.
Features:
Saramonic blink500 tx+tx+rx is an Easy to use wireless microphone system that can work well with DSLR, mirrorless, video camera, mobile phones etc
Light-weight and ultra-compact, just clip it to your collar directly for two-person interviewing.
Adjustable three level sound volume. Adjust the Audio level by +&- button
With built-in mic and battery, It can work last 6 hours.
Reference Audio Input Level: -30 to -42dBv (Microphone Input, 0 dB Attenuation)
Audio Gain Control: 11dB, 18dB, 25dB
Plug-In Power: Yes, 1V
Distortion: ≤0.1%
Digital Resolution: 24-bit / 48kHz
Frequency Response: 20Hz to 16kHz
Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area
Max Number of Simultaneous Systems: 18 (up to 36 Microphones)
Antenna: Built-in 1/4λ Wire Antenna
Buttons: On / Off / Pair, Volume Up, Volume Down
Battery: Built-in Li-ion 3.7V / 400mAh
Approx. Battery Life: 5 hours
Charging Connector: USB Type-C (1.5 hours to be fully charged)
Input: 1/8'' (3.5mm) Microphone Input
Indicators: 4 x Blue LEDs: Indicates Power and Audio Level, 1 x Red LED: Indicates Low Battery Level, 1 x Green LED: Flashing when Charging / Off when Charge Finished
The Blink 500 B2 is impossibly compact and lightweight, yet it delivers crystal-clear professional sound quality. The versatile transmitters feature excellent sounding built-in microphones that capture voices perfectly. Small enough to clip to a shirt or slide into a pocket and versatile enough to set on a table or podium, or even used handheld. They also operate as traditional bodypack transmitters with the included SR-M1 professional omnidirectional clip-on lavalier microphones, providing even more professional and inconspicuous miking solutions.
So advanced it's effortless.
Some wireless microphone systems are complicated to operate and require detailed knowledge of their menus and settings, but the Blink 500 B2 is so technically advanced that it couldn't be easier to use. You just turn it on, and it works. But behind the scenes the Blink 500 is doing a lot to ensure excellent performance. It operates on the interference-free 2.4GHz spectrum, and automatically hops channels to avoid static noise and audio dropouts. Pairing the transmitters with the receiver is simple, and all of the complicated aspects of using wireless microphones happen seamlessly in the background, letting you concentrate on storytelling and getting a great shot.
Perfect levels and power.
One of the tricky aspects of capturing sound for video is controlling the audio levels. Some people speak very loudly, while others speak very softly. That's why Blink 500 transmitters have easy-to-use gain buttons to raise or lower the levels at the touch of a button, and intelligent LED displays that show you where they're set. The internal Lithium batteries get 5 hours of life from a charge with the included charging cables, and the USB-C ports can be used to power or recharge the units in the field with portable USB battery packs. The 10-milliwatt power of the transmitters gives you an impressive range of 98 feet (30 meters) with obstacles, and 164 feet (50 meters) in open spaces.