BHD
JOD
KWD
LBP
QAR
SAR
USD
AED
Audio-Technica AT-VM95E Dual Moving Magnet Turntable Cartridge
This VM95 Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge's special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance Housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws - no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable at-vmn95 Replacement styli.
Features:
- Aluminium cantilever
- 4.0mV output voltage
- Compatible body with all VM95 Series stylus assemblies
- Replacement for AT95E and AT95EX
- 20 to 22,000Hz frequency response
Recommended Products
Delivered within 3-5 working days
Prepaid Product
Customer Also Viewed
Samma3a Review
Technical Specification
- Model: AT-VM95E
- Type: VM Stereo Dual Magnet
- Mounting: 1/2” centres
- Frequency Response: 20 - 22,000 Hz
- Channel Separation: 20 dB (1 kHz)
- Output Channel Balance: 2.0 dB (1 kHz)
- Output Voltage: 4.0 mV (@ 1 kHz, 5 cm/sec)
- Vertical Tracking Angle: 23°
- Vertical Tracking Force Range: 1.8 - 2.2g (standard 2.0 g)
- Stylus Shape: Elliptical
- Stylus Size: 0.3 x 0.7 mil
- Stylus Construction; Bonded Round Shank
- Cantilever: Aluminium Pipe
- Coil Impedance: 3.3 kΩ (1 kHz)
- Coil Inductance: 550 mH (1 kHz)
- DC Resistance: 485 Ω
- Static Compliance: 17 x 10 – 6 cm / dyne
- Dynamic Compliance: 7 x 10 – 6 cm / dyne (100 Hz)
- Wire Used for Coil: T.P. Copper
- Recommended Load Impedance: 47,000 Ω
- Recommended Load Capacitance: 100-200 pF
- Cartridge Weight: 6.1g
- Dimensions: 17.2 x 18.9 x 28.3 ( H x W x D mm)
- Replacement Stylus: AT-VMN95E
- Warranty: 1 year
What Is In The Box
- Audio-Technica AT-VM95E Dual Moving Magnet Turntable Cartridge
- Two 11 mm installation screws;
- Two 8 mm installation screws;
- Two washers
Videos
Manufacture Description
Audio-Technica AT-VM95E Dual Moving Magnet Turntable Cartridge
The AT-VM95E, the new Audio-Technica entry model Elliptical cartridge will replace the legendary AT95E and take advantage of the developments of the AT95EX introduced in 2015. The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts.
Elliptical Bonded Stylus
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.
No Use of Nuts
VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.