BHD
JOD
KWD
LBP
QAR
SAR
USD
AED
FiiO BTR3 Portable HiFi Bluetooth Receiver with aptX/LDAC
The BTR3 is the first High Fidelity Bluetooth amplifier to support all formats such as AAC, SBC, aptX, aptX Low Latency, aptX HD, LDAC, and LHDC. With this, the BTR3 ensures that great sound quality will be given to headphones and the performance is even paired with a Qualcomm CR8675 Bluetooth chip for a low-power transmission and processing of 24-bit. The chip also gives a more stable signal strength even when there are lots of interference. A high performance AK4376A DAC allows for extremely low distortions and extremely high signal-to-noise ratio for a very detailed music. Meanwhile, its battery is capable of an 11-hour playback with only 1.5 hours of charging time. It also has a built-in microphone for calls that is capable of noise cancellation with Qualcomm’s cVc noise cancellation technology to ensure crystal clear calls while a double click of its multifunctional button brings up Siri in iOS.
Additionally, the BTR3 can be connected to smartphones via Bluetooth and then connected to a car’s audio system through a 3.5mm audio cable that even allows hands-free calls. Moreover, it can also be connected to home theater systems that do not have Bluetooth connectivity through the same connection while through the Type C connector it can be used as a USB DAC without needing a driver.
- Bluetooth audio codec indicator
- Supports USB DAC functionality
- CSR8675 Bluetooth chip
- One-touch NFC pairing
- Volume Control
- Type C connector
- Aluminum alloy body wrapped in 2.5D glass
- Comes with rear clip and lanyard
المنتجات المقترحة
التوصيل خلال 3-5 يوم عمل
فيزا وماستر كارد
منتجات شاهدها عملاء آخرون
معاينة موقع سماعة تك
تفاصيل المُنتج
- Type: Bluetooth Receiver
- Volume Adjustment: Independent adjustment separating from cellphone's volume
- Profile: HFP,HSP,A2DP,AVRCP
- Supported Audio Formats: AAC, SBC, aptX, aptX Low Latency, aptX HD, LDAC, and LHDC
- Bluetooth Chip: CSR8675
- AMP/DAC: AK4376A
- USB DAC: Yes
- Pairing Button: Yes
- Volume Button: Yes
- Transmission Distance: 30m (at open area)
- Status Indicator Light: RGB light indicates the input Bluetooth audio codec, charging and working status
- Hands-free call/Mic: Yes
- Call up Siri in iOS: Yes
- NFC: Yes
- Headphone Output: 3.5 mm stereo jack
- USB Port: Type C
- Battery Capacity: 300mAh
- Battery Life: About 11h
- Charging Time: 1.5h
- Dimensions: 58*25*10.4mm (excl. back clip)
- Wearing: Clip + lanyard
- Weight: About 25g
- Warranty: 1 year
ماذا في العلبة
- Type C USB charging cable*1
- Quick Start Guide*1
- Warranty Card*1
- Lanyard*1
الفيديوهات
مواصفات المُصنع
|
|
|
|
|---|---|---|
Qualcomm CR8675 Bluetooth chipThe Qualcomm CR8675 Bluetooth chip used in the BTR3 is a premium low-power solution designed for enhanced audio applications with support for 24-bit transmission and processing, thanks to its 120MHz DSP. |
High-performance AK4376A DACThe AK4376A DAC in the BTR3, with its extremely low -107 dB distortion and extremely high 124 dB SNR, means that you will be able to catch every last nuance and detail in your music. |
Unmatched Bluetooth format supportThe BTR3, using Bluetooth 4.2, is the first Bluetooth amplifier in the world to support all current wireless audio codecs – such as AAC, SBC, aptX, aptX Low Latency, aptX HD, LDAC, and LHDC. |
|
|
|
|
|---|---|---|
An artisan’s touchThe aluminum alloy body wrapped in 2.5D glass and the oleophobic coating that keeps off fingerprints give the compact BTR3 an elegant look that would not be out of place in a specialty artisan’s shop. |
RGB indicator lightSBC: Blue light flashing AAC: Cyan light flashing aptX/aptX low latency: Purple light flashing aptX HD: Yellow light flashing LDAC/DAC: White light flashing/stays steadily on LHDC: Green light flashing |
11 hours of playbackThe 300 mAh battery in the BTR3 takes only 1.5 hours to fully charge but allows for a lengthy 11 hours of playback! |
|
|
|
|
|---|---|---|
Built-in microphoneThe BTR3 is equipped with Qualcomm's cVc noise cancellation technology, which automatically adjusts the microphone and actively suppresses background noise so that your call comes through as clear and audible as possible. |
One-touch NFC pairingThe BTR3 can be paired to other compatible devices with just a simple tap using the NFC wireless short-range communication protocol, entirely avoiding the cumbersome traditional pairing process. |
Connect to your carYou can connect your smartphone to the BTR3 via Bluetooth, and then connect the BTR3 to your car's audio system via a 3.5mm audio cable. |
|
|
|
|
|---|---|---|
Rejuvenate your home theaterSimply connect your Bluetooth source to the BTR3, and then connect the BTR3 to your home audio system with a 3.5mm audio cable. |
Smart assistantCall up Siri in iOS whenever you want simply with a double click of the multifunctional button the BTR3. |
Type-C connector supports USB DACThe BTR3 adopts the Type-C connector, which is easier to use than ever with its symmetric connector, allow you to insert a cable either way. USB DAC functionality is now also supported – no drivers needed here, simply plug and play! |
