BHD
JOD
LBP
OMR
QAR
SAR
USD
AED
iFi Audio Mercury3.0 USB Audio Cable / 1.0m
The iFi Mercury isn't the common USB cable. One look at the beautiful design reveals it features three custom-made metal oxide ceramic RG noise filters for the ultimate in clarity and quiet. And while these triple RF silencers provide the widest possible filter range without affecting the USB signal, the cable's FINAL USB connectors provide stellar end-to-end shielding. Solidly built and smartly crafted, Mercury is also a price-to-performance overachiever.
- Quadrupe Shields
- 5.0Gbps USB3.0 Superspeed
- FINAL USB audiophile connector
- The power of RF3
Recommended Products
Delivered within 3-5 working days
Prepaid Product
Customer Also Viewed
Samma3a Review
Technical Specification
- Type: USB connector
- Construction: Minimu inductance parallel construction
- Conductors: 24 and 28AWG
- Conductor material: Heavy OFHC continuous cast copper silver matrix
- Insulation: HD Polyethylene
- Shielding: Quadruple-shields
- Impedance: 90Ohms
- AC spark insulation : 1500V
- Insulation resistance: 100Mohm
- Tensile strength: 1500PSI
- Lengths: 0.5m/98g (0.22 lbs)
- Weights: 1.0m/115g (0.25 lbs)
- Warranty: 1 year
What Is In The Box
- iFi Audio Mercury 3.0 USB Audio Cable
Videos
Manufacture Description
iFi Audio Mercury 3.0 USB Audio Cable
The new Mercury3.0 – the best just got upgraded. As iFi don’t believe in sibling rivalry, they’ve given the Mercury single run cable the same treatment as the Gemini to create the new Mercury3.0.
With generic mass-produced USB cables, the data and power cables are normally packed together. This means that they do not conduct as well as they should and they are not sufficiently shielded from each other. This has a negative impact on USB signal integrity and degrades sound quality.
The Mercury3.0 breaks the mould.
The Mercury has quadruple shielding to fully separate and protect the delicate USB data signal from the USB power.
It employs heavy OFHC continuous copper silver matrix conductors for the best possible signal transfer. The construction is a custom minimum inductance parallel type with quadruple shields – this protects the cable from RFI and EMI noise to provide the cleanest transfer medium possible:
In a normal USB cable, the power and audio signals are confined together with cross-interference and insufficient shielding between eachother. However in the iFi Audio Mercury 3.0 USB cable, the power and audio signals are individually transferred with adequate shielding and no interference between them.
With the machined FINAL connectors and atypical RF3 filter designs, the iFi Mercury3.0 sets a whole new sonic benchmark for computer audio transmission.
Features:
- Quadrupe Shields
- 5.0Gbps USB3.0 Superspeed
- FINAL USB audiophile connector
- The power of RF3
Need for speed
USB3.0 is vastly superior to USB2.0 at handling high-data volumes. The USB3.0 platform mandates better connectors and higher quality cables – the new Mercury3.0 meets these needs with ease. This much higher standard transmission platform means USB audio passes with the least disturbance. It is akin to driving on a newly paved highway compared to with potholes. The former enables faster, smoother and less-jittery audio & power transfer. The sonic benefits are proof for all to hear.
As audio transmission standards improve, the Mercury3.0 with its USB ultra-speed bandwidth of 5.0Gbps, is also future-proofed.
Shielded to the max
With quadruple shielding, the Mercury3.0 protects the cable from RFI and EMI noise to provide the cleanest transfer medium possible for the USB signal. This means sound quality is not compromised as with many ‘off the shelf’ versions where inadequate shielding is commonplace.
Exceptional from beginning to end
In the Mercury3.0 the signal runs through the cable and the connector. This means the connector too must be exceptional. Most USB cables use moulded plastic covered connections that do not shield the high frequencies present in the USB data link, so noise will radiate out. Durability is also compromised as very few make their own connectors.
The FINAL USB connectors provide impeccable end-to-end RF shielding, being machined entirely from solid, aircraft-grade aluminium. Plus gold-plated connections make for years of steadfast service.
The power of RF3
Most standard USB cables do not address RF issues. Most ‘off the shelf‘ versions that are fitted with filters work over too narrow a range. And even then this is only fitted at the ends of the cables, leaving the length of the cable to act as an antennae.
The Mercury3.0 is fitted with three custom-made metal oxide ceramic RF noise silencers. Each has a different effective range so that they greatly broaden the range over which RF noise is silenced. Furthermore, the middle silencer is adjustable and can be moved along the whole length of the cable. This then “detunes” the antennae formed by the cable, depending on the conditions and requirements in the system. The other 2 silencers should be kept as close to each respective end as possible.
A match made in USB heaven
The Mercury3.0 is a perfect match with the iGalvanic3.0 and the micro/nano USB3.0. The iGalvanic3.0 fully galvanically isolates the USB3.0/2.0 signal and power.
The micro/nano USB3.0 both boast a Super Regulator, not only with super low-noise (0.1uV/0.5uV) but also with super low output impedance (around 0.00015 Ohm at 1KHz, as low as 0.00003 Ohm at 100Hz to DC) to maximise the total USB connection.