BHD
JOD
LBP
OMR
QAR
SAR
USD
AED
Emotiva Audio A-300 BasX Stereo Power Amplifier Black
This unique combination allows us to offer a combination you just can’t find anywhere else – great sound and great value. All of the components in our new BasX line are priced to be within reach of every music lover. You don’t need to be rich to afford them, and you don’t need to be an engineer to figure out how to use them. They’re carefully crafted to give you many years of reliable and trouble-free service, and they’ll look great in your living room or on your audio rack.
The BasX A-300 is a two channel power amplifier. You can use the BasX A-300 for an excellent stereo sound system, or to run two channels in a home theater system or anywhere a great sounding two channel power amp is needed.
- Plenty of clean power - 150 watts RMS per channel into 8 Ohms; both channels driven, 20 Hz to 20 kHz, < 0.1% THD
- Great sounding Class A/B output stage - ensures smooth detailed sound and incredibly natural imaging - without a trace of harshness or strain.
- Top quality parts and construction throughout - promise years of reliable service.
- Heavy duty insulated five-way speaker binding posts - allow you to use a wide range of speaker cables with bare wires, lugs, or banana plugs.
- Trigger input and output - let you configure your BASX A-300 to turn on and off with your other audio equipment.
المنتجات المقترحة
التوصيل خلال 3-5 يوم عمل
فيزا وماستر كارد
منتجات شاهدها عملاء آخرون
معاينة موقع سماعة تك
تفاصيل المُنتج
- Power Output (two channels driven): 150 watts RMS per channel; 20 Hz – 20 kHz; THD < 0.1%; into 8 Ohms /300 watts RMS per channel; 1 kHz; THD < 1%; into 4 Ohms
- Power Bandwidth (at rated power; 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.07 dB).
- Broad Band Frequency Response: 5 Hz to 80 kHz (+ / – 1.8 dB).
- THD + noise: < 0.02% (A-weighted); at rated power; 1 kHz; 8 Ohms
- Signal to Noise Ratio (8 Ohm load): > 120 dB (A-weighted); ref rated power. /> 100 dB (A-weighted); ref 1 watt.
- Minimum Recommended Load Impedance: 4 Ohms; which equals one 4 Ohm load or two paralleled 8 Ohm loads.
- Damping Factor (8 Ohm load): > 500.
- Speaker Output Connections: Audiophile grade, 5-way binding posts.
- Input Sensitivity (for rated power; 8Ohm load): 1.2 V.
- Gain: 29 dB.
- Input Connections: Unbalanced (RCA); one per channel.
- Input Impedance: 27 kOhms (unbalanced).
- Trigger: Trigger Input: 5 – 12 V (AC or DC); <10 mA input current required. /Trigger Output: 12 VDC; can drive any load up to 120 mA.
- Power Requirements: 115 VAC or 230 VAC @ 50 / 60 Hz (automatically detected).
- Dimensions: 17” wide x 4” high x 15.5” deep (does not include connectors) / 21-1/2” wide x 8” high x 21” deep (boxed).
- Weight: 11 KG (net) 14.5 KG (boxed)
ماذا في العلبة
الفيديوهات
مواصفات المُصنع
BasX Features
The BasX offers all the essential features that make a great audio component. The circuitry in the BasX A-300 features a heavy duty linear power supply, great sounding high-current short signal path Class A/B amplifier modules, a trigger input and output, and industry standard unbalanced audio inputs. It also includes audiophile-quality fault protection that’s completely transparent in normal operation, yet protects the A-300 and your other equipment from common fault conditions.
BasX Performance
The BasX A-300 delivers real audiophile sound quality – and we’ve got the specs to back that up: 150 watts RMS per channel at less than 0.1% THD into 8 ohms; THD+N of less than 0.02%; and a signal to noise ratio of 120 dB referenced to full power.
BasX Simplicity
While the BasX A-300 offers lots of performance, you won’t need a Ph.D. to install and use it. Just plug the BasX A-300 into any standard 115 VAC or 230 VAC line; it will figure out the correct voltage to use. A removable heavy-duty power cable is included, and, if you want to experiment with power cords, the BasX A-300 also accepts any industry standard IEC power cable. The speaker outputs are heavy duty five-way insulated binding posts that work equally well with bare wire, banana plugs, or spade lugs.
BasX Quality
The BasX A-300 is built to last, with a heavy duty steel chassis, solid milled aluminum faceplate, and high-quality parts and construction… We expect you to enjoy your BasX A-300 for a long time – and we back that up with a full three-year warranty.
The BasX A-300
Features
- Great sounding Class A/B output stage – ensures smooth, detailed sound and incredibly natural imaging – without a trace of harshness or strain.
- Wide band with low noise design – Hear everything your high definition sources have to offer.
- Heavy duty linear power supply – with an oversized torodial power transformer and plenty of current capacity to drive even difficult speakers.
- Top quality parts and construction – promise years of reliable service.
- Double sided FR4 circuit boards with plated-through holes – enable us to use short, optimized signal paths and minimize the need for point-to-point wiring.
- Totally stable – designed for use in the real world, with real speakers.
- Heavy steel 2RU chassis with milled aluminum faceplate – provide strength and rugged good looks.
- Heavy duty insulated five-way speaker binding posts – allow you to use a wide range of speaker cables with bare wires, lugs, or banana plugs.
- Remote trigger input and output – allow the BasX A-300 to be turned on by trigger-enabled equipment, and to activate other trigger-enabled equipment.
- Audiophile-grade fault protection – entirely transparent under normal conditions, yet protects the amp and your other equipment from all common fault conditions.
- Universal AC line voltage operation – the BasX A-300 is designed to operate on either 115 VAC or 230 VAC at 50/60 Hz, and automatically detect and configure themselves to operate with your local line voltage.
- Standard IEC power inlet