BHD
JOD
KWD
LBP
OMR
QAR
SAR
USD
Universal Audio Volt 476P USB-C Audio Interface
Start recording right out of the box with a high-quality 4-in / 4-out USB audio interface, award-winning DAW, and suite of UAD plug-ins and instruments including classic Teletronix LA‑2A compressors and Pultec EQs, plus new favorites like PolyMAX Synth, Century Tube Channel Strip, and Oxide Tape Recorder. Built with timeless UA analog sound, Volt 476P USB Recording Studio gives you the sound of your favorite records.
Features:
- Desktop 4-in / 4-out USB audio interface with 4 preamps and class-leading 24-bit / 192 kHz audio conversion
- Vintage Mic Preamp mode for recording your voice, guitar, or any instrument with the rich, full sound of an iconic UA tube preamp
- 76 Compressor adds clarity and punch to vocals, instruments, and other sources with analog circuit based on UA's renowned 1176
- Listen in realtime as you record with Direct Monitoring for latency-free recording
- Bus-powered and class-compliant for hassle-free set-up with Mac, PC, iPad, and iPhone using the included USB-C to USB-A cable
- Studio-quality headphone amplifier for loud, clear monitoring
- 48V phantom power for condenser microphones
- Stylish, rugged construction built to withstand years of use
Recommended Products
Prepaid Product
Customer Also Viewed
Samma3a Review
Technical Specification
I/O:
- Monitor Outputs: Two (one stereo pair)
- Headphone Output: Two stereo
- USB: One USB 2.0 port (USB Type-C connector)
- MIDI: In, Out (two 5-pin DIN connectors)
A/D – D/A Conversion:
- Supported Sample Rates (kHz): 44.1, 48, 88.2, 96, 176.4, 192
- Bit Depth: 24
ANALOG I/O:
- Microphone Input(s):
- Frequency Response: 20 Hz to 20 kHz, ±0.1 dB
- Dynamic Range (A–weighted): 112 dB
- THD + Noise (1 kHz @ -1 dBFS): -103 dB (0.0007 %)
- Equivalent Input Noise (150 Ohms, A-weighted): -127 dBu
- Maximum Input Level: 9 dBu
- Input Impedance: 3 Kilohms
- Available Gain: 55 dB
- Phantom Power: +48V (switchable)
- Connector Type: XLR Female, pin 2 positive
- Instrument Input(s):
- Frequency Response: 20 Hz to 20 kHz, ±0.05 dB
- Dynamic Range (A–weighted): 111 dB
- THD + Noise (1 kHz @ -1 dBFS): -84 dB (0.006 %)
- Maximum Input Level: 12.5 dBu
- Input Impedance: 1 Megohms
- Available Gain: 55 dB
- Connector Type: ¼” TS unbalanced
- Line Input(s):
- Frequency Response: 20 Hz to 20 kHz, ±0.05 dB
- Dynamic Range (A–weighted): 111 dB
- THD + Noise (1 kHz @ -1 dBFS): -102 dB (0.0008 %)
- Maximum Input Level: 22 dBu
- Input Impedance: 15 Kilohms
- Available Gain: 55 dB
- Connector Type: ¼” TRS balanced or TS unbalanced
- Line Input 3 & 4 (4, 476 & 476P only):
- Frequency Response: 20 Hz to 20 kHz, ±0.05 dB
- Dynamic Range (A–weighted): 113 dB
- THD + Noise (1 kHz @ -1 dBFS): -105 dB (0.0008 %)
- Maximum Input Level: 22 dBu
- Input Impedance: 15 Kilohms
- Available Gain: 55 dB
- Connector Type: ¼” TRS balanced or TS unbalanced
- Monitor & Line Output(s):
- Frequency Response: 20 Hz to 20 kHz, ±0.1 dB
- Dynamic Range (A–weighted): 110 dB
- THD + Noise (1 kHz @ -1 dBFS): -102.5 dB (0.00075%)
- Maximum Output Level: 15 dBu
- Output Impedance: 100 Ohms
- Connector Type: ¼” TRS balanced or TS unbalanced
- Headphone Output(s):
- Frequency Response: 20 Hz to 20 kHz, ±0.1 dB
- Dynamic Range (A–weighted): 110 dB
- THD + Noise (1 kHz @ -1 dBFS): -102.5 dB (0.00075%)
- Maximum Output Level: 15 dBu
- Output Impedance: 100 Ohms
- Connector Type: ¼” TRS balanced or TS unbalanced
SYSTEM REQUIREMENTS:
- macOS & Windows:
- Available USB 2.0 (or higher) port
- USB cable (included)
- Intel, AMD, or Apple silicon processor
- Windows 10 or Windows 11 (64-bit editions)
- macOS Catalina 10.15 or newer operating system
- Internet connection for software downloads
- iPad & iPhone:
- iPadOS / iOS 14 or newer
Warranty: 1 year
What Is In The Box
- Universal Audio Volt 476P USB-C Audio Interface
- USB Type-A to Type-C cable
- External Power Supply Unit with AC adapter kit
Videos
Manufacture Description
Collaborate with Best-in-Class Audio Quality
From the team that brought you the game‑changing Apollo interface, Volt 476P delivers superior studio sound quality for projects that require more inputs, with more character and tone than any USB interface in its class.
Capture Legendary Tones with Vintage Mic Preamp Mode
Few sounds can compare to a vintage Universal Audio 610 tube preamp, the same preamp used to record everyone from Ray Charles to Van Halen. Volt 476P gives you the rich, full sound of this iconic UA preamp, thanks to its built‑in tube emulation circuitry, a UA exclusive.
Easy In, Easy Out
Volt 476P gives you 4 analog preamp inputs — simply plug your mics, guitars, or synths into the front panel. Then connect your speakers or headphones to monitor your audio with no latency. With Volt, you’ll be creating like a pro, fast.
iPad & iPhone Ready
Traveling light? Plug Volt 476P into your iPad or iPhone, and you can easily create beats and samples, record your band’s rehearsals, and edit songs anywhere.