BHD
JOD
KWD
LBP
OMR
QAR
SAR
USD
Onkyo TX-RZ730 9.2 Channel 4k Network A/V Receiver Black
Here's a budget-friendly a/V receiver with the core power needed for 7.2.4-Ch (with external amp) Dolby Atmos or DTS: x playback at THX certified select theater-reference volume to enhance the jaw-dropping spectacle of 4K HDR video as it unfolds on screen.
Features:
- THX-Certified select theater Reference power 100 W/Ch. (8 ohms, 20 Hz-20 kHz, 0.08% THD, 2 Ch. Driven, FTC) and 225 W/Ch. (6 ohms, 1 kHz, 10% THD, 1 Ch. Driven)
- Dolby Atmos and DTS: x playback through 5.2.4 or 7.2.2 channels and now with 11.2 multichannel pre-outs and processing for 7.2.4-Ch playback with an external stereo power amp
- Your Onkyo receiver can now be part of your existing Sonos Home Sound System, or the start of a new one. Instantly upgrade the music streaming capability of your home theater receiver with Sonos Connect and a free firmware update.
Recommended Products
Prepaid Product
Customer Also Viewed
Samma3a Review
Technical Specification
Amplifier Section
Power Output
- All Channels 100 W/Ch (8 Ohms, 20 Hz-20 kHz, 0.08% THD, 2 Channels Driven, FTC)
- 225 W/Ch (6 Ohms, 1 kHz, 10% THD, 1 Channel Driven)
- Dynamic Power 250 W (3 Ohms, Front)
- 220 W (4 Ohms, Front)
- 130 W (8 Ohms, Front)
- THD+N (Total Harmonic Distortion + Noise) 0.08% (20 Hz-20 kHz, half power)
- Input Sensitivity and Impedance 200 mV/82 k-ohms (Line)
- 3.5 mV/47 k-ohms (Phono MM)
- Rated RCA Output Level and Impedance 1 V/470 Ohms (Sub pre-out)
- 1 V/2.3 k-Ohms (Zone Pre Out)
- 1 V/200 mV/470 ohms (Zone pre/line out)
- Frequency response 5 Hz–100 kHz/+1 dB, -3 dB (Direct Mode)
- Phono Overload 70 mV (MM, 1 kHz, 0.5%)
- Tone Control ±10 dB, 20 Hz (Bass)
- ±10 dB, 20 kHz (Treble)
- Signal-to-Noise Ratio 106 dB (Line, IHF-A)
- 80 dB (Phono, IHF-A)
- Speaker Impedance 4 ohms–16 ohms
Video Section
- Input Sensitivity/Output Level and Impedance -
- Video 1.0 Vp–p/75 Ohms (Component Y)
- 0.7 Vp–p/75 Ohms (Component PB/CB, PR/CR)
- 1.0 Vp–p/75 Ohms (Composite)
Tuner Section
- Tuning Frequency Range
- FM 87.5 MHz–1070.9 MHz
- AM 530 kHz–1,710 kHz
- FM/AM Preset Memory 40 stations
General
- Power Supply AC 120 V~, 60 Hz
- Power Consumption 750 W
- No-Sound Power Consumption 70 W
- Standby Power Consumption 0.15 W
- Warranty: 1 Year
What Is In The Box
- Onkyo TX-RZ730 9.2-Channel Network A/V Receiver
- Remote Control
- 2 x AAA Batteries
- Indoor FM Antenna
- AM Loop Antenna
- Speaker Setup Microphone
- Power Cord
Videos
Manufacture Description
 |
The Premium Onkyo ExperienceOur RZ Series takes performance and build-quality to the next level for a reference experience. Custom high-current transformer, customized block capacitors, and other upgraded parts deliver 5 Hz-100 kHz frequency response for wall-shaking bass, clean treble, and fast dynamics. RZ Series supports a variety of home theater and multi-room layouts to suit you, while details such as 12 V trigger, RS-232C, IP Control, and IR input make home integration easy.
|
Works with SonosWith Sonos Connect, the awesome home theater you’ve built around your Onkyo receiver can now be part of your existing Sonos Home Sound System, or the start of a new one. Instantly upgrade the music streaming capability of your home theater with Sonos Connect and a free firmware update. After a simple set up, your Onkyo A/V receiver will seamlessly tie into Sonos, instantly waking, changing inputs and playing at the volume you command through the familiar Sonos app. |
 |
 |
THX® Certified Select™ theater-reference audioTHX Certified Select guarantees theater-reference sound in your home. To gain certification, amplifiers must pass severe bench-tests covering every aspect of performance. THX Certified Select components suit rooms where screen-to-seat distance is about 10 ft. (3 m) and volume 2,000 cubic feet (57 m3).
|
Dolby Atmos® and DTS:X™ at up to 7.2.4 channelsHear Dolby Atmos and DTS:X soundtracks through 7.2.2 or 5.2.4 channels. Connect an outboard power amp via 11.2-multichannel pre-outs and enjoy seamless top-to-bottom, side-to-side, and front-back coverage with four in-ceiling speakers and seven floor-standers. Individual sounds aren't tied to channels and move naturally around your audience. |
 |