Mackie Studio Bundle - Monitors, Monitor Controller, Headphones, and Two Microphones

Studio Monitor:

• Monitor Type: Active 2-Way
• Enclosure: Bass-Reflex
• Power Rating: 50 W Peak
• Drivers:
  • LF Driver: 1 x 3" / 7.62 cm Polypropylene Cone
  • HF Driver: 1 x 0.75" / 1.91 cm Silk Dome
• Amplification: 1 x Full-Range Amplifier: Class-D50 W Peak
• Performance:
• Frequency Range:
  • 70 Hz to 20 kHz (at -10 dB)
  • 80 Hz to 20 kHz (at -3 dB)
• Maximum Sound Pressure Level (SPL): 97 dB
• Phase Adjustment: None
• Signal Processing:
• EQ: None
• Filters: None
• Parametric EQ: None

Crossover:

• Crossover Frequency: 3 kHz

Connectivity:

• I/O:
  • 2 x 1/4" TRS Balanced/Unbalanced Female Analog Input
  • 1 x 2RCA Unbalanced Female Analog Input
  • 1 x 1/8" / 3.5 mm TRS Unbalanced Female Analog Input
  • 2 x Push Terminal Unbalanced Female Analog Output
  • 1 x 1/8" / 3.5 mm TRS Unbalanced Female Analog Output

Power:

• AC Input Power: 100 to 240 VAC, 50/60 Hz
• Power Consumption: 60 W

Environmental:

• Operating Temperature: 32 to 104°F / 0 to 40°C

General:

• Enclosure Material: MDF
• Mounting Points: None
• Dimensions (W x H x D): 5.5 x 8.1 x 7.1" / 14 x 20.6 x 18 cm (Each)
• Weight: 7.8 lb / 3.5 kg (Pair)

Studio Monitor Controller:

• Inputs: 
  • 2 x Combo XLR-1/4" TRS Balanced/Unbalanced Mic/Line Inputs
  • 2 x 1/4" TRS Balanced/Unbalanced Line Inputs
  • 1 x 1/8" / 3.5 mm TRS Unbalanced Stereo Input
• Outputs:
  • 2 x 1/4" TRS Balanced/Unbalanced 2-Track Line Outputs
  • 4 x 1/4" TRS Balanced/Unbalanced Monitor Outputs
  • 2 x 1/4" TRS Unbalanced Headphone Outputs
• USB I/O: 1 x USB 2.0 Type-B
• Resolution: 24-Bit / 192 kHz
• Frequency Response: 20 Hz to 20 kHz (±0.5 dB, Unity Gain, +4 dBu Input)
• Noise:
  • Mic Inputs to Outputs: < -125 dBu RMS, A-Weighted (150 ohms Terminated, 22 kHz Bandwidth)
  • Line Inputs to Outputs: < -90 dBu RMS, Unweighted (150 ohms Terminated, 22 kHz Bandwidth)
• THD + N: <0.01% Unweighted (Unity Gain, 1 kHz at +4 dBu Input, 80 kHz Bandwidth)
• Crosstalk: < -60 dB at 1 kHz (Unity Gain, -1 dBFS Input)
• Attenuation:
  • Muted: -60 dB
  • Dim: -20 dB
  Maximum Input Level: +22 dBu
• Maximum Output Level: +22 dBu
• Power Requirements: 100 to 240 VAC, 50/60 Hz, 0.75 A via Universal Power Supply
• Dimensions (W x D x H): 6.4 x 9.9 x 3.2" / 16.3 x 25.1 x 8.1 cm
• Weight: 3.5 lb / 1.6 kg

Condenser Microphone:

• Form Factor: Stand/Boom-Mount
• Sound Field: Mono
• Operating Principle: Pressure Gradient
• Capsule: 1 x Condenser
• Polar Pattern: Cardioid
• Orientation: Side Address
• Circuitry: Solid-State
• Pad: None
• High-Pass Filter: None
• Tone Adjustment: None
• Indicators: None
• On-Board Controls: None
• Windscreen: Built-In

Performance:

• Frequency Range: 20 Hz to 18 kHz
• Maximum SPL: 134 dB SPL (1 kHz, 1% THD)
• Impedance: 150 Ohms ± 30% at 1 kHz
• Sensitivity: -30 dBV/Pa at 1 kHz
• Signal-to-Noise Ratio: 78 dB
• Equivalent Noise Level: 16 dB A-Weighted

Connectivity:

• Output Connectors: 1 x XLR 3-Pin Male (on Mic)
• Headphone Connector: None
• Number of Conductors: 2
• Operating Voltage: 48 V

Physical:

• Color: Black
• Mounting: Shockmount (with Included Hardware)
• Dimensions: ø: 1.9 x L: 6.1" / ø: 4.83 x L: 15.49 cm
• Weight: 0.46 lb / 0.21 kg

Dynamic Vocal Microphone:

• Form Factor: Handheld / Stand/Boom-Mount
• Sound Field: Mono
• Operating Principle: Pressure Gradient
• Capsule: 1 x Dynamic
• Polar Pattern: Cardioid
• Orientation: End Address
• Circuitry: Solid-State
• Pad: None
• High-Pass Filter: None
• Tone Adjustment: None
• Indicators: None
• On-Board Controls: None
• Windscreen: Built-In
• Performance:
• Frequency Range: 50 Hz to 16 kHz
• Impedance: 600 Ohms ± 30% at 1 kHz
• Sensitivity: -52 dBV/Pa at 1 kHz

Connectivity:

• Output Connectors: 1 x XLR 3-Pin Male (on Mic)
• Headphone Connector: None
• Number of Conductors: 2
• Operating Voltage: Not Specified by Manufacturer

Physical:

• Color: Black
• Mounting: Mic Clip (Included)
• Dimensions: ø: 2 x L: 7.3" / ø: 5.08 x L: 18.54 cm
• Weight: 0.66 lb / 0.3 kg

Warranty: 1 year