BHD
JOD
KWD
LBP
OMR
QAR
SAR
USD
Audio-Technica AT-VM95E/H Turntable Headshell & Cartridge Combo Kit
This VM95 Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws.
Features:
- AT-VM95E mounted on AT-HS6BK headshell
- The total set weight is 15.5g
- Assembled and tested in the Audio-Technica Factory in Fukui-Japan
Recommended Products
Prepaid Product
Customer Also Viewed
Samma3a Review
Technical Specification
- Model: AT-VM95E/H
- Type: VM Stereo Dual Magnet
- Mounting: 1/2” centres
- Frequency Response: 20 - 22,000 Hz
- Channel Separation: 20 dB (1 kHz)
- Output Channel Balance: 2.0 dB (1 kHz)
- Output Voltage: 4.0 mV (@ 1 kHz, 5 cm/sec)
- Vertical Tracking Angle: 23°
- Vertical Tracking Force Range: 1.8 - 2.2g (standard 2.0 g)
- Stylus Shape: Elliptical
- Stylus Size: 0.3 x 0.7 mil
- Stylus Construction: Bonded Round Shank
- Cantilever: Aluminium Pipe
- Coil Impedance: 3.3 kΩ (1 kHz)
- Coil Inductance: 550 mH (1 kHz)
- DC Resistance: 485 Ω
- Static Compliance: 17 x 10 – 6 cm / dyne
- Dynamic Compliance: 7 x 10 – 6 cm / dyne (100 Hz)
- Wire Used for Coil: T.P. Copper
- Recommended Load Impedance: 47,000 Ω
- Recommended Load Capacitance: 100-200 pF
- Weight: 15.5 g
- Dimensions: 21.2 × 21.4 × 62.4 ( H x W x D mm)
- Replacement: Stylus AT-VMN95E
- Warranty: 1 year
What Is In The Box
- Audio-Technica AT-VM95E/H Turntable Headshell & Cartridge Combo Kit
Videos
Manufacture Description
VM95 Series Conical Stereo Cartridge
The AT-VM95E, the new Audio-Technica entry model Elliptical cartridge will replace the legendary AT95E and take advantage of the developments of the AT95EX introduced in 2015. The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts.
Preassembled with AT-HS6BK Headshell
The AT-VM95C cartridge is fitted onto the 9g aluminium die cast body headshell
Conical Bonded Stylus
The benefit of conical styli, even if the cartridge is "lean", is the ball surface of the stylus touches the groove of vinyl records precisely.
VM95 Series - Styli Compatibility
Every cartridge diamond stylus becomes worn after a period of play. Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.
Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.
The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.