BHD
JOD
KWD
LBP
OMR
QAR
SAR
USD
Audio-Technica AT-VM95C/H Turntable Headshell & Cartridge Combo Kit
This VM95 Series cartridge with 0.6 mil conical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation & low distortion for outstanding tonal quality. The durable housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws.
Features:
- VM95 Series dual magnet cartridge with 0.6 mil conical stylus
- Aluminum cantilever
- Specially wound coils increase output voltage
- Durable low-resonance polymer housing
- Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required
- Compatible with any AT-VMN95 replacement stylus
Recommended Products
Prepaid Product
Customer Also Viewed
Samma3a Review
Technical Specification
- Model: AT-VM95C/H
- Type: VM Stereo Dual Magnet
- Mounting: 1/2” centres
- Frequency Response: 20 - 20,000 Hz
- Channel Separation: 18 dB (1 kHz)
- Output Channel Balance: 2.5 dB (1 kHz)
- Output Voltage: 4.0 mV (@ 1 kHz, 5 cm/sec)
- Vertical Tracking Angle: 23°
- Vertical Tracking Force Range: 1.8 - 2.2g (standard 2.0 g)
- Stylus Shape: Conical
- Stylus Size: 0.6 mil
- Stylus Construction: Bonded Round Shank
- Cantilever: Aluminium Pipe
- Coil Impedance: 3.3 kΩ (1 kHz)
- Coil Inductance: 550 mH (1 kHz) DC
- Resistance: 485 Ω
- Static Compliance: 17 x 10 – 6 cm / dyne
- Dynamic Compliance: 6.5 x 10 – 6 cm / dyne (100 Hz)
- Wire Used for Coil: T.P. Copper
- Recommended Load Impedance: 47,000 Ω
- Recommended Load Capacitance: 100-200 pF
- Weight: 15.5 g
- Dimensions: 21.2 × 21.4 × 62.4 ( H x W x D mm)
- Replacement Stylus: AT-VMN95C
- Warranty: 1 year
What Is In The Box
- Audio-Technica AT-VM95C/H Turntable Headshell & Cartridge Combo Kit
Videos
Manufacture Description
VM95 Series Conical Stereo Cartridge
The AT-VM95C, the new Audio-Technica entry model Conical cartridge will replace the legendary AT90 Series models such as AT91, AT91R and CN5625AL. Also, the AT-VM95C is a “budget” cartridge featuring a conical stylus, the compatibility in the range will allow to upgrade with any of the 4 other LP styli of the Series such as Elliptical, Elliptical Nude, Microlinear and Shibata.
Preassembled with AT-HS6BK Headshell
The AT-VM95C cartridge is fitted onto the 9g aluminium die cast body headshell
Conical Bonded Stylus
The benefit of conical styli, even if the cartridge is "lean", is the ball surface of the stylus touches the groove of vinyl records precisely.
VM95 Series - Styli Compatibility
Every cartridge diamond stylus becomes worn after a period of play. Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.
Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.
The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.