BHD
JOD
KWD
LBP
OMR
QAR
SAR
USD
Audio-Technica AT-LPW50PB Fully Manual Belt-drive Stereo Turntable
The AT-LPW50PB is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an anti-resonance 30 mm thick MDF (medium density fiberboard) plinth, with a high-gloss, piano-black finish, to dampen low-frequency acoustical feedback, and a sensor-monitored motor to ensure accurate platter rotation speeds of 33-1/3 and 45 RPM.
Features:
- Fully manual belt-drive operation with 33 1/3 and 45 rpm speeds
- Motor features a speed-sensor system to help maintain accurate platter rotation speed
- Adjustable dynamic anti-skate control
- Anti-resonance, die-cast aluminum platter with rubber mat
- Cartridge is compatible with nearly any VM95 series replacement stylus to meet most applications
- Straight tonearm with hydraulically damped lift control and lockable rest
Recommended Products
Prepaid Product
Customer Also Viewed
Samma3a Review
Technical Specification
- Type: Belt-drive manual turntable
- Motor: DC servo with Active Speed Stabilization
- Drive Method: Belt drive
- Speeds: 33-1/3 RPM, 45 RPM
- Turntable Platter: Die-cast aluminum
- Wow and Flutter: < 0.15% WRMS (33 RPM) at 3 kHz
- Signal-to-Noise Ratio: >60dB
- Output Level:
- Pre-amp “PHONO”: 4.0 mV nominal at 1 kHz, 5 cm/sec
- Pre-amp “LINE”: 200 mV nominal at 1 kHz, 5 cm/sec
- Phono Pre-Amp Gain: 35 dB nominal, RIAA equalized
- Power Supply Requirements: 100-240 V, 50/60 Hz, 0.5 A Max.
- Dimensions:
- With dustcover: 420.0 mm (16.54") W x 356.0 mm (14.02") D x 126.0 mm (4.96") H
- Without dustcover and hinges: 420.0 mm (16.54") W x 356.0 mm (14.02") D x 114.0 mm (4.49") H
- Weight: 5.56 kg (12.26 lbs.) without dust cover
- Notes:
- Tonearm type: Static balanced straight carbon tonearm
- Effective arm length: 223.6 mm
- Overhang: 18.6 mm
- Tracking error angle: <2 degrees
- Applicable cartridge weight: 12-17 g
- Stylus pressure adjustment range: 0-3 g
- Replacement Stylus: AT-VMN95E BK
- Warranty: 1 year
What Is In The Box
- Audio-Technica AT-LPW50PB Fully Manual Belt-drive Stereo Turntable
- Audio-Technica Consumer AT-HS4 Universal 1/2" Mount Headshell (Black)
- Audio-Technica Consumer AT-VMN95EBK Replacement Stylus for AT-VM95E Cartridge (Black)
- 3.3' Stereo RCA Audio Cable with Ground Wire
- 45 rpm Adapter
- Counterweight
- Platter with Drive Belt
- Rubber Turntable Mat
- 4.9' AC Power Adapter
- Dust Cover with Hinges
Videos
Manufacture Description
Fully manual, belt-drive turntable
High-fidelity audio reproduction from vinyl at two speeds: 33-1/3 and 45 RPM. Motor features a speed-sensor system for accurate platter rotation speed.
Piano-black finish
Anti-resonance 30 mm thick MDF (medium density fiberboard) plinth with high-gloss, piano-black finish.
Professional platter
Professional anti-resonance, die-cast aluminum platter with rubber mat. Also featuring high-isolation, height-adjustable feet.
Switchable output
Features built-in switchable phono preamplifier for phono or line-level output.