BHD
JOD
KWD
LBP
OMR
QAR
SAR
USD
Audio-Technica AT-LP3WH Fully Automatic Stereo Turntable - White
The at-lp3 fully automatic belt-drive turntable lets you take your analog listening experience to the next level with advanced Features not typically found on automatic turntables. The balanced straight tone arm comes with a 1/2" mount universal head shell and at91r dual moving magnet phono cartridge, giving you excellent high-fidelity performance, plus the option to use other moving magnet or moving coil cartridges of your choosing.
Features:
- Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
- Balanced straight tonearm with hydraulically damped lift control and lockable rest
- Built-in switchable phono/line pre-amplifier with attached dual RCA output cable
- Switchable modes for moving magnet and moving coil cartridges
- AT91R Dual Moving Magnet™ phono cartridge and AT-HS3 universal headshell
- Anti-resonance, die-cast aluminium platter with 4.5 mm thick rubber mat
- Damped base construction for reduced low-frequency feedback colouratio
Recommended Products
Prepaid Product
Customer Also Viewed
Samma3a Review
Technical Specification
Turntable
- Type: Fully Automatic, Belt-Drive
- Motor: DC motor
- Speeds; 33-1/3 RPM, 45 RPM
- Turntable Platter: Die-cast aluminium
- Wow and Flutter: Less than 0.2% WRMS (33 1/3 RPM) at3kHz
- Signal-to-Noise Ratio: > 60 dB
- Output Level:
- “PHONO” (MM) 3.5mV nominal at 1kHz, 5cm/sec
- “LINE” (MC) 220mV nominal at 1kHz, 5cm/sec
- Phono Pre-Amp Gain:
- 36dB nominal, RIAA equalised
- 56dB nominal, RIAA equalised
- Power Supply Requirements: 220 to 240 V / 50, 60 Hz
- Power Consumption: 2W
- Dimensions: 435 mm ×353 mm×128 mm (W×D×H)
- Weight: 5.2kg
Cartridge & Stylus
- Model: AT91R
- Type: VM Dual Magnet
- Output Voltage: 3.5mV (mV at 1kHz, 5 cm/sec)
- Vertical Tracking Force Range: 1.5 to 2.5g (standard 2.0g)
- Stylus Construction: 0.6 mil bonded conical
- Cantilever: Aluminium pipe
- Recommended Load Impedance: 47,000 ohms
- Weight: 5.0g
- Warranty: 1 year
What Is In The Box
- Audio-Technica AT-LP3BK Fully Automatic Stereo Turntable - White
- Rubber mat
- Dust cover
- Platter (with drive belt)
- Counterweight
- AT-HS3 Headshell with AT91R VM stereo cartridge
- 45 RPM adapter
- Power cable
Videos
Manufacture Description
Audio-Technica AT-LP3BK Fully Automatic Stereo Turntable - Black
Fully automatic belt-drive turntable with simple start/stop operation that plays both 33-1/3 and 45 RPM records
Hydraulically damped lift control
Balanced straight tonearm with hydraulically damped lift control allows the stylus to be precisely and safely lowered at any point on a record
Switchable pre-amp modes
Built-in switchable phono/line pre-amplifier with dual RCA output
AT91R dual moving magnet cartridge
Specifically designed for the LP3, the AT91R cartridge incorporates an aluminum cantilever for higher-rigidity & improved pick-up of subtle details
Universal headshell
Removable universal AT-HS3 headshell allows users to upgrade their cartridge to further enhance sound. Suitable for 1/2" mount cartridges & 4-pin turntable arms
4 mm platter mat
Anti-resonance, die-cast aluminum platter with 4 mm thick rubber mat