BHD
JOD
KWD
LBP
OMR
QAR
SAR
USD
Synco G2-A2 Ultracompact 2-Person Digital Wireless Microphone System
The SYNCO G2(A2) is a dual wireless microphone. It comes from G1(A2) and is reborn with a display to show all main indicators. It continues processing the input audio via patented technology and sending clean, clear audio based on 2.4GHz digital transmission technology. With 1 receiver and 2 transmitters, G2(A2) records two sound sources at the same time, applicable to a wide range of content creations.
Features:
- For Journalists, Vloggers, YouTubers
- 2 x Transmitters with Built-In Mic + Lav
- Ultracompact Dual-Channel Receiver
- Connects to 3.5mm Input on Camera
- Easy to Use, 1-Button Pairing
- TFT Displays on Transmitters & Receiver
- Adjustable Gain on Receiver, Mute Button
- 3.5mm Cables for Camera & Mobile Device
- 8-Hour Built-In Rechargeable Batteries
- 492' Range
المنتجات المقترحة
فيزا وماستر كارد
منتجات شاهدها عملاء آخرون
معاينة موقع سماعة تك
تفاصيل المُنتج
Transmitter (TX )
- Wireless Transmission: Digital 2.4GHz
- RF Frequency Band: 2400-2483.5MHz
- Frequency Response: 20Hz-20KHz
- Working Distance:
- 492ft/150m (LOS area)
- 164ft/50m (NLOS area)
- Mounting: Pocket Clip
- Audio Input: 1/8" / 3.5mm TRS Mic Input
- Audio Input Level: 1V (0dBV)
- Power Requirements: 3.3V-4.7V
- Battery Type: Built-in Lithium Battery, 400mAh
- Battery Charging Time: 1.5h
- Battery Life: 8h
- Display: TFT Screen
- Dimensions: 52×42×17mm
- Material: Plastic
- Weight: 39g
Receiver (RX)
- Wireless Transmission: Digital 2.4GHz
- RF Frequency Band: 2400-2483.5MHz
- Approximate RF Sensitivity: -81dBm
- Working Distance:
- 492ft/150m (LOS area)
- 164ft/50m (NLOS area)
- Mounting: Pocket Clip
- Number of Audio Channels: 2
- Audio Output:
- 1/8” / 3.5mm TRS Mic Output
- 1/8“ / 3.5mm TRS Headphone Output
- Gain: 0-5 Level
- Audio Output Level: Line Out: 1V; Monitoring: 25-30mW
- Power Requirements: 3.3V-4.7V
- Battery Type: Built-in Lithium Battery, 400mAh
- Battery Charging Time: 1.5h
- Battery Life: 8h
- Display: TFT Screen
- Dimensions: 52×42×17mm
- Material: Plastic
- Weight: 39g
Microphone
- Form Factor: Built-in/External Mic
- Sound Field: Mono
- Polar Pattern: Omnidirectional
- Frequency Range: 50Hz-20KHz
- Sensitivity: -40dB (±3 dB, re 1V/Pa at 1KHz)
- Max. SPL: 135dB SPL (at 1KHz)
Warranty: 1 year
ماذا في العلبة
- Synco G2-A2 Ultracompact 2-Person Digital Wireless Microphone System
- 2 x Transmitters (TX)
- Receiver (RX)
- 2 x Lavalier Microphones
- 2 x Microphone Wind Muffs
- 2 x Furry Windshields
- 3.5mm TRS to TRS Output Cable
- 3.5mm TRS to TRRS Output Cable for Smartphones
- 3-in-1 USB Charging Cable
- Eject Pin
الفيديوهات
مواصفات المُصنع
New TFT Display & One More Transmitter Make G2(A2) a Well-deserved Plus
The SYNCO dual wireless microphone system G2(A2) distinguishes itself from G2(A1) by having the other transmitter to achieve the recording of 2-person dialogue and the flexibility of output modes, and differs from G1(A2) by a true-color TFT display on both transmitter and receiver to make each key figure such as recording mode and battery status, readable under different light intensities.
Algorithm 2.0 Enhances Transmission of Stability & Security
The SyncoderTM Encrypted Transmission Algorithm 2.0 enhances the signal stability of the digital microphone system within 492ft/150m (Line-Of-Sight) and 164ft/50m (Non-Line-Of-Sight) effective range. It runs the Frequency Hopping Spread Spectrum (FHSS) technique to detect the location on it’s own intuitive and then by itself turns to the optimal frequency so that no signal conflicts would occur. This also helps protect privacy and reduce interference.
Integrated Signal Processing Brings Little Latency Output
The Digital Signal Processor (DSP) chip in the professional dual wireless microphone system optimizes the signal from input to output directly. The full synchronization of signal capture, processing, and delivery is a guarantee of the almost zero latency transmission and quality sound production, perfect for immediate use and great for live broadcast.
3-in-1 Quick Charging Supports Each Continued Recording
The 3-in-1 charging solution allows the charging of this 2 channel wireless microphone (2TX+1RX) at the same time with one power source. It takes only 40 min to get the system 50% powered and 1 hour to reach 80%. The capacity-expanded battery supports 8-hour continued working if fully charged.